Skip to main content

Zest_Interface_RS232

Overview

The Zest_Interface_RS232 is an electronics development board for 6TRON opensource platform based on MAX3227 transceiver from Texas instrument.

The MAX3227 is a full-Duplex RS-232 transceiver with 1 Driver and 1 Receiver. It provides an electrical interface between an asynchronous communication controller and the serial-port connector.

The chip includes an Auto-Powerdown feature when the interface cable is disconnected or the distant transceiver is inactive for 30s.

The board operates at data-signaling rates up to 1 Mbit/s in normal operating mode.

The Zest_Interface_RS232 can be used as a RS232 interface to devices, systems and sensors communicating with low power over a long distance.

Zest_Interface_RS232

Specifications

MAX3227:

  • RS-232 full duplex transceiver
  • Single channel
  • Drv/Rcvr Operates at up to 1Mbit/s
  • Auto-Powerdown
  • Detects active remote transceiver (nINVALID)
FeatureDetails
ADP7118Low-noise linear LDO regulator Output: 3.3V / 200mA
Connectivity80-pin 6TRON header 4-pin 2-row 1.5mm-pitch JST header (power and data) 4-pin 1-row 2.54mm-pitch header for prototyping
Board size80 x 39 mm
Power Supply3.3 to 12V from stack, 3.3V internal
CategoryZest_Interface

Block Diagram

The graphics below gives an overview of the board features and connections.

Zest_Interface_RS232

80-pin 6TRON header

This table shows how the pinout on Zest_Interface_RS232 corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).

Description6TRON functionPin numberPin number6TRON functionDescription
-VJACK12VJACK-
-VJACK34VJACK-
-VHV56VHV-
-VHV78VHV-
-DIO8910VIN_EN-
-DIO71112DIO9-
-DIO61314DIO10-
-MD1516DIO11-
-DIO51718DIO12UART Zest to core (alternate)
GroundGND1920GNDGround
GroundGND2122GNDGround
6TRON Stack Power SupplyVIN2324VIN6TRON Stack Power Supply
6TRON Stack Power SupplyVIN2526VIN6TRON Stack Power Supply
-VB_EN2728DIO13Valid input (alternate)
-VB_OUT2930DIO14Ready (alternate)
-DAC13132DIO15Force ON (option)
-ADC43334DIO16Force OFF (option)
-ADC33536DIO17-
-ADC23738DIO18UART core to Zest (alternate)
-ADC13940GND-
-EXT_NRST4142GND-
ReadyDIO44344VREF-
Valid inputDIO34546DIO19-
Force OFF (option)DIO24748DIO20-
Force ON (option)DIO14950DIO21-
-WKUP5152DIO22-
-ICAPT5354DIO23-
-PWM35556DIO24-
-PWM25758DIO25-
-PWM15960DIO26-
-SPI1_SS6162DIO27-
-SPI1_SCK6364DIO28-
-SPI1_MISO6566DIO29-
-SPI1_MOSI6768DIO30-
UART core to ZestUART1_TX6970DIO31-
UART Zest to coreUART1_RX7172DIO32-
-I2C1_SDA7374DIO33-
-I2C1_SCL7576DIO34-
-CAN1_TX7778DIO35-
-CAN1_RX7980DIO36-

Software Support

The Zest_Radio_RS232 provides a demo example developed using MBed Os. The board can run on Zest Core development boards.

Environmental impact

The Eco score of the Zest_Interface_RS232 is expressed in points representing the environmental impact of an average European per year.

Zest_Interface_RS232

Zest_Interface_RS232

Eco-score details

BOM

Componentdataunit
Passive electronic component0,0483g
Active electronic component0,0162g
LED0,00g
Other component0,00g
Connectors Switchs2,79g
Logique type integrated circuit0,14g
Memory type integrated circuit0g
PCB3120mm²

Consumption

Low voltage electricity voltage France
Current20mA
Supply voltage5V
Autonomy100h
% use75%
Power0,0075kWh

Ressources