Zest_Adapter_Click
Overview
The Zest_Adapter_Click is an electronics development board for 6TRON open source platform built around the mikroBUS socket from Mikroelektronika.
The mikroBUS socket pinout consists of three groups of communications pins (SPI, UART and I2C), six additional pins (PWM, Interrupt, Analog input, Reset and Chip select), and two power groups (+3.3V and 5V).
The Zest_Adapter_Click board offers 6TRON users the possibility to use the full range of Click board in 6TRON plateform.
Specifications
| Connectivity | 80-pin 6TRON header 2×8 female headers |
|---|---|
| Board size | 80 x 39mm |
| Power Supply | 3.3 to 12V from stack, 3.3V and 5V internal |
| Category | Zest_Adapter |
Block Diagram
The graphics below gives an overview of the board features and connections.
80-pin 6TRON header
This table shows how the pinout on Zest_Adapter_Click corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).
| Description | 6TRON function | Pin number | Pin number | 6TRON function | Description |
|---|---|---|---|---|---|
| - | VJACK | 1 | 2 | VJACK | - |
| - | VJACK | 3 | 4 | VJACK | - |
| - | VHV | 5 | 6 | VHV | - |
| - | VHV | 7 | 8 | VHV | - |
| - | DIO8 | 9 | 10 | VIN_EN | - |
| - | DIO7 | 11 | 12 | DIO9 | - |
| SPI Chip Select (alternate) | DIO6 | 13 | 14 | DIO10 | - |
| - | MD | 15 | 16 | DIO11 | - |
| Interrupt Input (alternate) | DIO5 | 17 | 18 | DIO12 | - |
| Ground | GND | 19 | 20 | GND | Ground |
| Ground | GND | 21 | 22 | GND | Ground |
| 6TRON Stack Power Supply | VIN | 23 | 24 | VIN | 6TRON Stack Power Supply |
| 6TRON Stack Power Supply | VIN | 25 | 26 | VIN | 6TRON Stack Power Supply |
| - | VB_EN | 27 | 28 | DIO13 | - |
| - | VB_OUT | 29 | 30 | DIO14 | - |
| - | DAC1 | 31 | 32 | DIO15 | - |
| Analog Input (alternate) | ADC4 | 33 | 34 | DIO16 | - |
| Analog Input (alternate) | ADC3 | 35 | 36 | DIO17 | - |
| Analog Input (alternate) | ADC2 | 37 | 38 | DIO18 | - |
| Analog Input | ADC1 | 39 | 40 | GND | - |
| Global Reset | EXT_NRST | 41 | 42 | GND | - |
| - | DIO4 | 43 | 44 | VREF | - |
| Interrupt Input | DIO3 | 45 | 46 | DIO19 | - |
| - | DIO2 | 47 | 48 | DIO20 | - |
| - | DIO1 | 49 | 50 | DIO21 | - |
| - | WKUP | 51 | 52 | DIO22 | - |
| - | ICAPT | 53 | 54 | DIO23 | - |
| - | PWM3 | 55 | 56 | DIO24 | - |
| - | PWM2 | 57 | 58 | DIO25 | - |
| - | PWM1 | 59 | 60 | DIO26 | - |
| SPI Chip Select | SPI1_SS | 61 | 62 | DIO27 | - |
| SPI Clock | SPI1_SCK | 63 | 64 | DIO28 | - |
| SPI MISO | SPI1_MISO | 65 | 66 | DIO29 | - |
| SPI MOSI | SPI1_MOSI | 67 | 68 | DIO30 | - |
| UART core to Zest | UART1_TX | 69 | 70 | DIO31 | - |
| UART Zest to core | UART1_RX | 71 | 72 | DIO32 | - |
| I2C Data | I2C1_SDA | 73 | 74 | DIO33 | - |
| I2C Clock | I2C1_SCL | 75 | 76 | DIO34 | - |
| - | CAN1_TX | 77 | 78 | DIO35 | - |
| - | CAN1_RX | 79 | 80 | DIO36 | - |
Environmental impact
The Eco score of the Zest_Adapter_Click is expressed in points representing the environmental impact of an average European per year.
Eco-score details
BOM
| Component | data | unit |
|---|---|---|
| Passive electronic component | 0,60 | g |
| Active electronic component | 0,036 | g |
| LED | 0,00 | g |
| Other component | 0,00 | g |
| Connectors Switchs | 3,72 | g |
| Logique type integrated circuit | 0,03 | g |
| Memory type integrated circuit | 0,00 | g |
| PCB | 3120 | mm² |
Consumption
| Low voltage electricity voltage France | ||
|---|---|---|
| Current | 20 | mA |
| Supply voltage | 5 | V |
| Autonomy | 100 | h |
| % use | 75 | % |
| Power | 0,0075 | kWh |