Skip to main content

Zest_Sensor_P-T-RH

Overview

The Zest_Sensor_P-T-RH is an electronics development board for 6TRON open source platform featuring 3 environment sensors (humidity, temperature, pressure).

The Zest_Sensor_P-T-RH integrates the following elements:

  • A humidity sensor HTU21DF from TE Connectivity. It is specially dedicated for humidity and temperature. It is configured to measure air humidity between 0 ~ 100 %HR

  • A temperature sensor AS6212-AWLT-S from AMS. It provides a 16-bit resolution over the full temperature range from -40°C to +125°C and integrated alarm functionality enables micro-controller wake-up calls at defined temperature thresholds

  • A pressure sensor 2SMPB-02E from Omron Electronics. It is configured to measure the pressure of air between 30kPa and 110kPa and integrates a temperature compensation circuit to ensure accurate absolute pressure measurements.

The Zest_Sensor_P-T-RH offers 6TRON users a P-T-RH sensors able to measure 3 environment parameters (humidity, temperature, pressure) to monitor air quality in health, environmental and industrial applications.

zest_sensor_p-t-rh

Specifications

HTU21DF:

  • Digital Humidity Sensor
  • Humidity Range: 0 ~ 100 %HR
  • I2C (@0x40) interface
FeatureDetails
AS6212-AWLT-SDigital Temperature Sensor Temperature Range : -40°C ~ 125°C I2C (@0x48) interface
2SMPB-02EDigital Pressure Sensor Pressure Range : 30 kPa ~ 110 kPa I2C (@0x70) interface
LM26LVCISDAutomatic fan control
Connectivity80-pin 6TRON header
Board size80 x 39 mm
Power Supply3.3 to 12V from stack, 3.3V internal
CateogoryZest_Sensor

Block Diagram

The graphics below gives an overview of the board features and connections.

zest_sensor_p-t-rh

80-pin 6TRON header

This table shows how the pinout on Zest_Sensor_P-T-RH corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).

Description6TRON functionPin numberPin number6TRON functionDescription
-VJACK12VJACK-
-VJACK34VJACK-
-VHV56VHV-
-VHV78VHV-
-DIO8910VIN_EN-
-DIO71112DIO9-
1 Wire (alternate)DIO61314DIO10-
-MD1516DIO11-
-DIO51718DIO12-
GroundGND1920GNDGround
GroundGND2122GNDGround
6TRON Stack Power SupplyVIN2324VIN6TRON Stack Power Supply
6TRON Stack Power SupplyVIN2526VIN6TRON Stack Power Supply
-VB_EN2728DIO13-
-VB_OUT2930DIO14-
-DAC13132DIO15-
-ADC43334DIO16-
-ADC33536DIO17-
-ADC23738DIO18-
-ADC13940GND-
-EXT_NRST4142GND-
-DIO44344VREF-
Fan ControlDIO34546DIO19-
1 WireDIO24748DIO20-
-DIO14950DIO21-
-WKUP5152DIO22-
-ICAPT5354DIO23-
-PWM35556DIO24-
-PWM25758DIO25-
Fan Control (alternate)PWM15960DIO26-
-SPI1_SS6162DIO27-
-SPI1_SCK6364DIO28-
-SPI1_MISO6566DIO29-
-SPI1_MOSI6768DIO30-
-UART1_TX6970DIO31-
-UART1_RX7172DIO32-
I2C DataI2C1_SDA7374DIO33-
I2C ClockI2C1_SCL7576DIO34-
-CAN1_TX7778DIO35-
-CAN1_RX7980DIO36-

Software Support

The Zest_Sensor_P-T-RH provides a demo example developed using MBed Os. The board can run on Zest Core development boards.

Environmental impact

The Eco score of the Zest_Sensor_P-T-RH is expressed in points representing the environmental impact of an average European per year.

zest_sensor_p-t-rh

zest_sensor_p-t-rh

Eco-score details

BOM

Componentdataunit
Passive electronic component0,027g
Active electronic component0,038g
LED0,00g
Other component0,00g
Connectors Switchs2,85g
Logique type integrated circuit0,98g
Memory type integrated circuit0g
PCB3120mm²

Consumption

Low voltage electricity voltage France
Current20mA
Supply voltage5V
Autonomy100h
% use75%
Power0,0075kWh

Ressources