Skip to main content

Zest_Radio_SPBTLE-RF0

Overview

The Zest_Radio_SPBTLE-RF0 is an electronics development board for 6TRON open source platform built around the STMicroelectronics SPBTLE-RF0 BLE module.

The SPBTLE-RF0 integrates the following elements:

  • A 2.4GHz RF front-end multiprotocol capable that supports Bluetooth Low Energy connectivity

  • Up to 4 dBm transmission and -88dBm reception sensitivity

  • Embeds an internal 2.4GHz chip antenna

  • Frequency Ranges from 2.402 GHz to 2.48 GHz.

The Zest_Radio_SPBTLE-RF0 offers 6TRON users a Bluetooth Low Energy network, connectivity to sensors, industrial equipment, and remote appliances.

Zest_Radio_SPBTLE-RF0

Specifications

SPBTLE-RF0:

  • Bluetooth Module - 802.15.1 low power RF
  • Protocol: Bluetooth 4.1, BLE
  • Frequency: 2.4GHz
  • Transmitter output power: 4dBm
  • Receiver sensitivity: -88dBm
  • Interface: GPIO and SPI
FeatureDetails
Connectivity80-pin 6TRON header
Board size80 x 39 mm
Power Supply3.3 to 12V from stack, 3.3V internal
CategoryZest_Radio

Block Diagram

The graphics below gives an overview of the board features and connections.

Zest_Radio_SPBTLE-RF0

80-pin 6TRON header

This table shows how the pinout on Zest_Radio_SPBTLE-RF0 corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).

Description6TRON functionPin numberPin number6TRON functionDescription
-VJACK12VJACK-
-VJACK34VJACK-
-VHV56VHV-
-VHV78VHV-
-DIO8910VIN_EN-
-DIO71112DIO9-
-DIO61314DIO10-
-MD1516DIO11-
-DIO51718DIO12-
GroundGND1920GNDGround
GroundGND2122GNDGround
6TRON Stack Power SupplyVIN2324VIN6TRON Stack Power Supply
6TRON Stack Power SupplyVIN2526VIN6TRON Stack Power Supply
-VB_EN2728DIO13-
-VB_OUT2930DIO14-
-DAC13132DIO15-
-ADC43334DIO16-
-ADC33536DIO17-
-ADC23738DIO18-
-ADC13940GND-
-EXT_NRST4142GND-
InterruptDIO44344VREF-
-DIO34546DIO19-
ResetDIO24748DIO20-
-DIO14950DIO21-
-WKUP5152DIO22-
-ICAPT5354DIO23-
-PWM35556DIO24-
-PWM25758DIO25-
-PWM15960DIO26-
SPI Chip selectSPI1_SS6162DIO27-
SPI ClockSPI1_SCK6364DIO28-
SPI Data OUTSPI1_MISO6566DIO29-
SPI Data INSPI1_MOSI6768DIO30-
-UART1_TX6970DIO31-
-UART1_RX7172DIO32-
-I2C1_SDA7374DIO33-
-I2C1_SCL7576DIO34-
-CAN1_TX7778DIO35-
-CAN1_RX7980DIO36-

Software Support

The Zest_Radio_SPBTLE-RF0 provides a demo example developed using Mbed OS. The board can run on Zest Core development boards.

Environmental impact

The Eco score of the Zest_Radio_SPBTLE-RF0 is expressed in points representing the environmental impact of an average European per year.

Zest_Radio_SPBTLE-RF0

Zest_Radio_SPBTLE-RF0

Eco-score details

BOM

Componentdataunit
Passive electronic component0,244g
Active electronic component0,017g
LED0,00g
Other component0,00g
Connectors Switchs2,73g
Logique type integrated circuit0,51g
Memory type integrated circuit0,00g
PCB3120mm²

Consumption

Low voltage electricity voltage France
Current20mA
Supply voltage5V
Autonomy100h
% use75%
Power0,0075kWh

Ressources