Zest_Test_Prototyping
Overview
The Zest_Test_Prototyping board is a development platform for prototyping new hardware functions using 6TRON design kit.
The Zest_Test_Prototyping boards are daughter boards that can interface with mother boards (Zest_core) through an 80-pin interface connector using different standard communication interfaces (SPI, I2C, UART, CAN…).
Each signal of the 80 pin interface connector is wired to a pad for easy acces to the prototyping area. Then, an array of pads with 2.54 mm spacing permits easy prototyping. In order to facilitate the routing, the pads are already interconnected in lines for the power supply signals and in rows.
The board also includes an adjustable DC/DC Buck converter that can be set to output a voltage between 0.6V and 6V with an input voltage selected from VJACK, VHV or VIN.
Specifications
| Connectivity | 80-pin 6TRON header |
|---|---|
| Board size | 80 x 39mm |
| Power Supply | 3.3 to 12V from stack, 3.3V internal (default) |
| Category | Zest_Test |
Block Diagram
The graphics below gives an overview of the board features and connections.
80-pin 6TRON header
This table shows how the pinout on Zest_Test_Prototyping corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).
| Description | 6TRON function | Pin number | Pin number | 6TRON function | Description |
|---|---|---|---|---|---|
| External PowerSupply | VJACK | 1 | 2 | VJACK | External PowerSupply |
| External PowerSupply | VJACK | 3 | 4 | VJACK | External PowerSupply |
| High VoltageExternal PowerSupply | VHV | 5 | 6 | VHV | High VoltageExternal PowerSupply |
| High VoltageExternal PowerSupply | VHV | 7 | 8 | VHV | High VoltageExternal PowerSupply |
| - | DIO8 | 9 | 10 | VIN_EN | - |
| - | DIO7 | 11 | 12 | DIO9 | - |
| - | DIO6 | 13 | 14 | DIO10 | - |
| - | MD | 15 | 16 | DIO11 | - |
| - | DIO5 | 17 | 18 | DIO12 | - |
| Ground | GND | 19 | 20 | GND | Ground |
| Ground | GND | 21 | 22 | GND | Ground |
| 6TRON Stack Power Supply | VIN | 23 | 24 | VIN | 6TRON Stack Power Supply |
| 6TRON Stack Power Supply | VIN | 25 | 26 | VIN | 6TRON Stack Power Supply |
| - | VB_EN | 27 | 28 | DIO13 | - |
| - | VB_OUT | 29 | 30 | DIO14 | - |
| Analog Output | DAC1 | 31 | 32 | DIO15 | - |
| Analog Input | ADC4 | 33 | 34 | DIO16 | - |
| Analog Input | ADC3 | 35 | 36 | DIO17 | - |
| Analog Input | ADC2 | 37 | 38 | DIO18 | - |
| Analog Input | ADC1 | 39 | 40 | GND | Ground |
| Global Reset | EXT_NRST | 41 | 42 | GND | Ground |
| I/O | DIO4 | 43 | 44 | VREF | - |
| I/O | DIO3 | 45 | 46 | DIO19 | - |
| I/O | DIO2 | 47 | 48 | DIO20 | - |
| I/O | DIO1 | 49 | 50 | DIO21 | - |
| System Wake up | WKUP | 51 | 52 | DIO22 | - |
| Input Capture | ICAPT | 53 | 54 | DIO23 | - |
| PWM Output | PWM3 | 55 | 56 | DIO24 | - |
| PWM Output | PWM2 | 57 | 58 | DIO25 | - |
| PWM Output | PWM1 | 59 | 60 | DIO26 | - |
| SPI Chip select | SPI1_SS | 61 | 62 | DIO27 | - |
| SPI Clock | SPI1_SCK | 63 | 64 | DIO28 | - |
| SPI_MISO | SPI1_MISO | 65 | 66 | DIO29 | - |
| SPI_MOSI | SPI1_MOSI | 67 | 68 | DIO30 | - |
| UART core to Zest | UART1_TX | 69 | 70 | DIO31 | - |
| UART Zest to core | UART1_RX | 71 | 72 | DIO32 | - |
| I2C Data | I2C1_SDA | 73 | 74 | DIO33 | - |
| I2C Clock | I2C1_SCL | 75 | 76 | DIO34 | - |
| UART core to Zest | CAN1_TX | 77 | 78 | DIO35 | - |
| UART Zest to core | CAN1_RX | 79 | 80 | DIO36 | - |
Environmental impact
The Eco score of the Zest_Test_Prototyping is expressed in points representing the environmental impact of an average European per year.
Eco-score details
BOM
| Component | data | unit |
|---|---|---|
| Passive electronic component | 0,21 | g |
| Active electronic component | 0,02 | g |
| LED | 0,00 | g |
| Other component | 0,00 | g |
| Connectors Switchs | 1,73 | g |
| Logique type integrated circuit | 0,01 | g |
| Memory type integrated circuit | 0,00 | g |
| PCB | 3120 | mm² |
Consumption
| Low voltage electricity voltage France | ||
|---|---|---|
| Current | 20 | mA |
| Supply voltage | 5 | V |
| Autonomy | 100 | h |
| % use | 75 | % |
| Power | 0,0075 | kWh |