Aller au contenu principal

Zest_Display_1-Digit

Overview

The Zest_Display_1-Digit is an electronics development board for 6TRON open source platform, featuring a 7-Segment digital displays.

The board is built around the TLC5916 8-Channel Constant-Current LED Sink Driver from Texas Instruments for use with Single Digit Numeric Display. The component uses an SPI bus for the selection of the LEDs. Total current is set using an onboard resistor.

2 alternative 7-Segment size of displays can be mounted:

  • 1.5inch (47 x 33mm) single digit numeric display (eg: SA15-11SRWA from Kingbright)
  • 1.8inch (56 x 38mm) single digit numeric display (eg: SA18-11SRWA from Kingbright)

In addition, the display can be replaced by 2 LEDs to form the time unit separator.

A supply voltage of 6V to 10V minimum is required to operate the large 7-Segments composed of series LEDs. The supply voltage input of the module is either VHV from the Bus or a 2-pin supply header.

The Zest_Display_1-Digit can be used as a stand-alone digit or interconnected with others to display letters, numbers and symbols in highly readable form. Different colors of 7-Segment displays can be used (Green, Red) depending on the reference selected.

Zest_Display_1-Digit

Specifications

TLC5916IPWR:

  • 8-Channel Constant-Current LED Sink Drivers
  • Type of display : Common-anode LEDs
  • Supply voltage : 3.3V to 5V
  • LED supply voltage : 20V max
  • LED supply current per channel : 3 to 120mA
FeatureDetails
MP2015ALow IQ LDO from Monolithic Power Systems 4V to 24V input range 3.3V / 150mA output
BCR401UE6327Constant current LED driver from Infineon Supply voltage up to 40V Output current adjustable between 10 and 65mA
Connectivity80-pin 6TRON header 2 Lateral 8 pin headers for daisy chain
Board size80 x 39 mm
Power Supply6 to 15V from VHV (6TRON Header) 6 to 15V from internal power supply header
CategoryZest_Display

Block Diagram

The graphics below gives an overview of the board features and connections.

Zest_Display_1-Digit

80-pin 6TRON header

This table shows how the pinout on Zest_Display_1-Digit corresponds to the pinout on the 6TRON BUS connector (the latter shown in the two middle columns).

Description6TRON functionPin numberPin number6TRON functionDescription
-VJACK12VJACK-
-VJACK34VJACK-
High Voltage External Power SupplyVHV56VHVHigh Voltage External Power Supply
High Voltage External Power SupplyVHV78VHV
-DIO8910VIN_EN-
-DIO71112DIO9Output Enable
-DIO61314DIO10-
-MD1516DIO11-
-DIO51718DIO12-
GroundGND1920GNDGround
GroundGND2122GNDGround
-VIN2324VIN-
-VIN2526VIN-
-VB_EN2728DIO13-
-VB_OUT2930DIO14-
-DAC13132DIO15-
-ADC43334DIO16-
-ADC33536DIO17-
-ADC23738DIO18-
-ADC13940GND-
-EXT_NRST4142GND-
-DIO44344VREF-
-DIO34546DIO19-
-DIO24748DIO20-
-DIO14950DIO21-
-WKUP5152DIO22-
-ICAPT5354DIO23-
-PWM35556DIO24-
2 Dots PWM control (option)PWM25758DIO25-
2 Dots PWM control (option)PWM15960DIO26-
SPI Chip selectSPI1_SS6162DIO27-
SPI ClockSPI1_SCK6364DIO28-
SPI MOSISPI1_MISO6566DIO29-
SPI MISOSPI1_MOSI6768DIO30-
-UART1_TX6970DIO31-
-UART1_RX7172DIO32-
-I2C1_SDA7374DIO33-
-I2C1_SCL7576DIO34-
-CAN1_TX7778DIO35-
SPI Chip select (alternate)CAN1_RX7980DIO36-

Software Support

The Zest_Display_1-Digit provide a demo example developed using MBed Os. The board can run on Zest Core development boards.

Environmental impact

The Eco score of the Zest_Display_1-Digit is expressed in points representing the environmental impact of an average European per year.

Zest_Display_1-Digit

Zest_Display_1-Digit

Eco-score details

BOM

Componentdataunit
Passive electronic component0,035g
Active electronic component0,05g
LED25,70g
Components(average)0,00g
Connectors Switchs2,04g
Logique type integrated circuit0,09g
Memory type integrated circuit0,00g
PCB3120mm²

Consumption

Low voltage electricity voltage France
Current20mA
Supply voltage5V
Autonomy100h
% use75%
Power0,0075kWh

Ressources