Aller au contenu principal

Z_Environment

Overview

The Z_Environment is an electronics development board for 6TRON open-source platform based on STM32L496RG microcontroller from ST Microelectronics.

The STM32L496RG is an Arm Cortex M4 32-bit RISC core operating at a frequency of up to 80MHz. The MCU controls the system and interfaces the user through a 6LoWPAN RF link. The board includes Bosch BME280 environment sensor that measures hygrometry, temperature and pressure.

The board uses the ATZB-RF-233-1-C RF module from Microchip with a built-in RF Front End Module (FEM) that has an integrated power amplifier and a low-noise amplifier. The RF module has its own 2.4GHz chip antenna and an MS-147 RF connector for an external antenna. A set of 10 white LEDs, independently controlled, is available to the user. An USB link is used for the powering and for programming the microcontroller.

The Z_Environment board offers 6TRON users an Environment Object able to measure various environment parameters (hygrometry, temperature, pressure) and transmit data through a 6LoWPAN link at regular intervals with a very low power consumption.

Z_Environment

Specifications

MCU Features :

  • ARM 32-bit Cortex-M4 CPU with floating point unit (FPU)
  • Adaptive real-time accelerator (ART Accelerator™)
  • 80 MHz max CPU frequency
  • 100 DMIPS and DSP instructions
FeatureDetails
ATZB-RF-233-1-CZigbit 2.4GHZ wireless modules Frequency : 2.4GHz ISM band RX sensitivity (-104dBm) output power (Up to +20.5dBm)
BME280Combined humidity and pressure sensor
ConnectivityTag connect 10-pin Tag connect micro-USB B
Board sizeLength : 62.14 mm; Width: 34mm
Power Supply5 V - 500 mA from the integrated micro-USB B header
CategoryZ_Object

Block Diagram

The graphics below gives an overview of the board features and connections.

Z_Environment

Software Support

The Z_Environment provides a demo example developed using Mbed OS.

Environmental impact

The Eco score of the Z_Environment is expressed in points representing the environmental impact of an average European per year.

Eco-score details

BOM

Componentdataunit
Passive electronic component0,034g
Active electronic component0,0085g
LED0,21g
Components(average)0,0116g
Connectors Switchs3,144g
Logique type integrated circuit0,3685g
Memory type integrated circuit0g
PCB840mm²

Consumption

Low voltage electricity voltage France
Current20mA
Supply voltage5V
Autonomy100h
% use75%
Power0,0075kWh

Ressources